MATERIAL SAFETY DATA SHEET (MSDS)
SPECIFICATION CHEMICALS, INC.
PO BOX 709
Boone, IA 50036
PRODUCT: #1300
|
Preparation
Date: 1/1/98 |
Supersedes:
5/l/96 |
Preparer:
James Withers, CIH |
PRODUCT DESCRIPTION: #1300 is a liquid acrylic emulsion formulated to
cure to a tough, flexible waterproof membrane. Specification Chemicals does not
anticipate any significant health or physical hazards associated with the
normal use of this material. Nonetheless, the user is strongly encouraged to be
familiar with the information presented in this MSDS and use prudent handling
practices at all times. Consult supervisory personnel, a health and safety
professional or the manufacturer regarding any adverse effects associated with
the use of this material.
|
Product Name: #1300 |
Formula: Not applicable |
|
Synonyms: None |
CAS Registry No.: Not applicable |
|
Chemical Family: Not applicable |
CAS Name: Not applicable |
Ingredient
|
Approx. Wt. %
|
OSHA PEL
|
ACGIH TLV
|
|
Proprietary polymer and additives |
~30 |
NE |
NE |
|
Dipropylene glycol dibenzoate (CAS# 27398-31-4) |
<8.0 |
NE
|
NE |
|
Crystalline silica: cristobalite (1) (CAS#
14464-46-1) |
<5.0 |
(2) |
0.05 mg/m3 |
|
Titanium dioxide (CAS# 13463-67-7) |
<3.0 |
15 mg/m3 |
10 mg/m3 |
|
Ethylene glycol (CA# 107-21-1) |
<2.0 |
NE
|
100 mg/m 3(3) |
|
Crystalline silica: quartz (1) |
<1.0 |
(4) |
0.1 mg/m3 |
|
Non-hazardous ingredients |
Balance |
NA
|
NA
|
NOTES:
|
(1) |
Crystalline silica (as cristobalite and quartz) as the
respirable fraction is listed as a Group 2A carcinogen ("probably
carcinogenic to humans") by the International Agency for Research on
Cancer (LARC). Material is suspended in liquid in product. Exposure potential
is negligible during normal use. |
|
(2) |
Occupational Safety and Health Administration (OSHA)
Permissible Exposure Limit (PEL) for crystalline silica (as cristobalite)
based on formula: 1/2 (30 mg/m3 / %SiO2+2). |
|
(3) |
Ceiling Limit - Concentration that should not be exceeded
during any part of the working exposure. |
|
(4) |
Occupational Safety and Health Administration (OSHA)
Permissible Exposure Limit (PEL) for crystalline silica (as quartz) based on
formula: (30 Mg/M3
/ %SiO2). |
ABBREVIATIONS:
ACGIH=American Conference of Governmental Industrial Hygienists; TLV=Threshold
Limit Value; NE=Not
Established;NA=Not Applicable
III. PHYSICAL DATA
|
Appearance: Translucent to milky fluid |
Odor: Mild odor |
|
Boiling point: >212 degrees Fahrenheit |
Specific Gravity (Water=1): 2 to 4 |
|
Vapor Density (Water=1): >1 |
Melting Point: Not applicable |
|
Vapor Pressure: Same as water |
Solubility: Dilutable |
This product is stable. Hazardous decomposition or polymerization will
not occur in normal use. There are no known incompatibilities with this
material. As with any chemical material, avoid prolonged use at extremely high
temperatures (>212 degrees Fahrenheit).
|
Flash point: Not applicable (aqueous fluid) |
Upper Explosive Limit: Not Applicable |
|
Autoignition Temperature: Not applicable |
Lower Explosive Limit: Not Applicable |
|
Autodecomposition Temperature: Not applicable |
|
|
|
|
|
Extinguishing Media: Material will not bum so use media appropriate for
surrounding materials. |
|
|
|
|
|
Special Firefighting Instructions: Use Self-Contained
Breathing Apparatus (SCBA) when fighting fires in enclosed areas. Product
will not burn but may spatter at elevated temperatures. Dried solids may bum
and give off oxides of carbon and nitrogen. |
|
VI. HEALTH HAZARD AND FIRST AID INFORMATION
|
Swallowing: |
No evidence from available information. For accidental
ingestion, seek medical help. |
|
Inhalation: |
Although very unlikely during normal use, improper use of
product in poorly ventilated area may cause respiratory irritation and/or nausea.
Remove victim to fresh air and seek medical help if symptoms persist. |
|
Skin Contact: |
Prolonged contact may cause reddening of the skin. Wash
affected area with soap and water and seek medical help if symptoms persist. |
|
Eye Contact: |
May cause eye irritation. Irrigate eyes with water. Seek
medical help if irritation persists |
If Material is Spilled: Restrict area to authorized personnel only. Contain
small spills by using an adsorbent such as vermiculite; adsorbent diking
materials may be used for larger spills.
Waste Disposal Methods: Consult local and/or state regulatory agencies for
appropriate disposal method.
VIII. PERSONAL PROTECTIVE EOUIPMENT
Respiratory Protection: Respirators not necessary during normal use. Consult
supervisory and/or safety and health personnel for respiratory protection needs
during special use circumstances. Per OSHA regulation 29 CFR 1910.134,
respirator users are required to be fit-tested and trained before proper usage.
Ventilation: General room ventilation is expected to be
satisfactory. Use of product in enclosed areas and/or special applications may
require supplementary local exhaust. Consult supervisory and/or health and
safety personnel.
Gloves: Use chemically-impervious, rubber gloves. As with any chemical
material, avoid prolonged contact.
Eye Protection: Wear safety glasses. For activities with high splash
potential, add side shields or face shield-
Precautions to be Taken in Handling and Storing:
The opinions expressed herein are those of qualified experts within Specification Chemicals, Inc. We believe the information contained herein is current as of the date of this MSDS. Since the use of this information and these opinions and the conditions of use of this product are not within control of Specification Chemicals, Inc., it is the user’s best obligation to determine the conditions of safe use of this product.