 |
POL-E-SCRIM is a woven polyester
fabric with a non-woven polyester fabric bonded to the surface.
Use as reinforcing for:
Converted by Specification Chemicals, Inc. |
||||||
| #5511 POL-E-SCRIM is a 5X5 -
strands-per-inch polyester scrim with a thin layer of spunbonded polyester
bonded to the top side. This is a special purpose roofing fabric
with tensile strength in both directions, plus elongation.
#5511 POL-E-SCRIM is applied over the entire field area of the roof. Start at the low (eave) side and shingle lap 2". Apply fabric over wet #100 Vap-R-Lok and smooth out the fabric with a long-handle paint roller. |
|||||||
| POL-E-SCRIM is the specified reinforcing fabric to use with Specification Chemicals, Inc. Recycled Rubber Roofing system. | |||||||
| #5511 POL-E-SCRIM POLYESTER FABRIC |
PHYSICAL PROPERTY DATA |
||||||
| Weight/Square | UNIT Pounds | Nominal .69 | Test Method Scale | ||||
| Yarns/Inches | Count | 5 | |||||
| Dry Tensile | lbs./inch | 50 | M/D | ||||
| Dry Tensile | lbs./inch | 45 | C/D | ||||
| Property values are averages and not specifications which were determined in compliance with the test methods. | |||||||
| Available sizes: | 6"x100' | 16# | 18 rolls | ||||
| 12"x100' | 16# | 9 rolls | |||||
| 36"x100' | 47# | 9 rolls | |||||
|
36"x360' |
69# | 4 rolls | |||||
|
Special order sizes available |
|||||||