Roofing System Materials

#80 Primer is a fast drying, solvent-based black primer used to coat concrete decks, asphalt roofing, plywood or OSB prior to applying Pol-E-Base, Stick-Two, E.S. Tape, acrylic roof coatings or Recycled Rubber Roofing.  Allow 2 hours but not more than 8 hours to dry before applying Pol-E-Base, Stick Two or ES Tape.

Apply #80 Primer at the rate of 150 square feet per gallon.  Rate will vary with the porosity of the substrate.  Apply with brush, roller or spray.  Thinning is not recommended.  Equipment is cleaned with mineral spirits.   

#80 Primer cannot be purchased on the web due to shipping restrictions. Please call 1-800-247-3932 for purchasing options.

#460 Pol-E-Base is a self-adhering roof membrane with removable paper on one side and Pol-E-Force (polyester reinforced fabric) on the top surface.  It is an excellent base for acrylic coatings and Recycled Rubber Roofing.

#460 Pol-E-Base is applied centered over the cant strips from the field area of the roof and up the parapet walls.  Pol-E-Base is available in 4", 6", 12" and 36" widths, so it can be used for patching problem areas, valleys, or the entire roof.

#600 FABRIC SATURANT
An acrylic liquid emulsion used in the metal building repair system as a surface conditioner and primer for #1300T when a full cover reflective insulating coating is applied.  The high solids acrylic formulation is deterrent to stains and asphalt bleeding and is an excellent saturant for exposed polyester fabric.  Equipment may be cleaned with water.


#1300 WHITE PLASTIC cures dry and
does not soften with the heat of the sun
and does not become brittle.

 #1300 White Plastic is a liquid acrylic emulsion that cures to a tough, flexible waterproof membrane and comes in either white or grey.  #1300 is an elastomeric product with exceptionally high solids content.  #1300 is UL listed and a time tested product since 1975.

#1300 White Plastic is applied to the entire surface at the rate of 100 square feet per gallon.